LVL Series Damp/Wet Location Emergency Lighting
LVL
Page 1 of 2
6 Volt 11 Watts Polycarbonate Housing
The LVL Series is an attractive emergency lighting unit designed for damp/wet locations, and vandal prone or high abuse areas. The powerful MR 16 halogen
lamps are fully adjustable, and are secured by an attractive molded lampholder which conceals all lamp head wiring.
Front View
Side View
7.66”
(19.5 cm)
8.67”
(22.0 cm)
(9.4 cm)
Complete Fixture consists of unit and two 5.5 watt MR 16-style halogen lamps. Select options and accessories below.
How to Specify:
LV
L
SERIES
BATTERY
HOUSING
COLOR
LOCATION
LISTING
LV = LVL Series
L = Lead Calcium
W = White
B = Black
Blank = Damp Location Listed
WL = Wet Location Listed
HR = Wet Location Listed with
Battery Heater
Damp/Wet Location
Emergency Light
Code Compliance
Features
UL 924 listed, UL damp location listing, optional UL wet location listing, NFPA
101, NEC, IBC, Meets ADA specifications for wall mounted lighting fixtures.
1. Illumination: Provided by two high performance 5.5 watt, 6 VDC MR
16-style halogen lamps. Lamps are held in an attractive molded swivel
assembly, and are fully adjustable. When mounted on 18’ centers (8’ AFF) the
LVL will provide an average of one footcandle along a linear path of egress.
IES photometric data files are available.
Accessories
T15TPTOOL = Tamperproof Tool
2. Housing: The high abuse housing, backplate and electronics shell are mold-
®
ed from high impact, GE Lexan polycarbonate. White housing is standard,
black is optional. All units are supplied standard with a UL damp location list-
ing and tamperproof screw kit. Optional wet location listed products include
a fully gasketed cover.
3. Installation: Wet location units may be mounted to standard 3-1/2” and 4”
octagonal junction boxes. Damp location untis may be junction box or rigid
conduit mounted.
4. Electronics: 120/277 VAC dual voltage input with surge-protected,
solid-state, fully automatic, voltage regulated charger. Charging system is
complete with low voltage disconnect, AC lockout, brownout protection and
combination indicator lamp and illuminated test switch. All circuit board com-
ponents are coated with a moisture resistant protector.
5. Battery: Maintenance-free, sealed lead calcium battery has an estimated
service life of 5 years and supplies 90 minutes of emergency power.
6. Input Power Requirements: 120 VAC - 0.05 amps; 277 VAC - 0.02 amps
7. Operating Temperature Range: Damp location: 50°F (10°C) to 104°F
(40°C); Wet location: 41°F (5°C) to 104°F (40°C); Wet location with heater:
-4°F (-20°C) to 104°F (40°C)
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
8. Electrical Specifications: Input power requirements at 120 VAC: 0.05
amps, 0.30 amps with heater option; Input power requirements at 277
VAC: 0.02 amps, 0.13 amps with heater option
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
Lightolier is a Philips group brand
|